320KW all-in-one DC charger

This product mainly provides high-power fast charging service for new energy vehicles, which can meet the fast charging needs of various types of vehicles such as medium and heavy trucks, sanitation trucks, mining trucks, passenger transport and buses.

Contact us

Product feature

1.Single gun charging up to 250A, double gun charging up to 500A, which is 25% higher than the national standard;

2.The output voltage range covers 100V~1000V, which can meet the charging requirements of various models. In the future, there is no need to change the pile when the vehicle voltage is upgraded to 1000V;

3.It adopts a backpack design with low center of gravity, which is easy install and maintain, has good stability, and reduces the construction cost of charging pile foundation;

4.Using high power density module, it occupies a smaller area than products of the same level, and each pile can reduce the area occupied by about 1.6 square meters;

5.The charging module adopts independent air duct and glue filling process, which can meet the needs of various complex environments and has high reliability.


Charging interface dual charger
Dimension 900mm*800mm*1439mm
Touch screen 8 inches
Standard gun wire 7.5m*2
Input voltage 380V±15%
AC network frequency 50Hz±10%
Access mode Three phase five wire system
Maximum output power 320kW
Output voltage 100~1000V
Output current 0~500A
Power factor(P≥50%) ≥0.99
Power (full power operation) ≥95%
Reference standard GB/T 18487.1-2015, GB/T 18487.2-2017, GB/T 27930-2015, GB/T 20234.1-2015, GB/T 20234.3-2015, NB/T 33001-2018, NB/T
33008.1-2018, GB 4208-2017
Other functions Background monitoring, remote upgrade, equipment self-test, big data analysis, dual gun charge, dual machine charge, operation management, slugging linkage and other functions
Protection function Cloud platform layer: fault warning, advance treatment; Pile data interworking, two-way safety check; Charging historical data analysis, big data protection.
System layer: battery voltage, overcurrent, overtemperature, reverse connection, reverse charge protection, input overvoltage, undervoltage, overcurrent protection, short circuit protection to the ground, emergency shutdown protection, insulation alarm protection, fault state warning.
component layer: charging connector temperature protection, module overheating protection, electronic lock protection, lightning protection, leakage protection, door protection.
Communication interface 4G/wifi/LAN
Heat dissipation mode Air cooling
Ingress protection IP55
Operating temperature -30℃~+55℃
Relative humidity 5~95%
Altitude ≤2500m
Noise ≤65dB
Apply Medium heavy card/mining card/sanitation

Send Message

Home WhatsApp Mail Inquiry